R&S SMJ100A, Operating Manual

Page: 436 / 874

Instrument Function
R&S
®
SMJ100A
420 Operating Manual 1403.7458.32 ─ 14
Carrier Table Assistant
Number of Carriers
Defines the number of carriers of the multi carrier waveform.
This parameter is identical to that in the "General Setting" section.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier:COUNt
on page 597
Carrier State
Switches the carriers in the range "Carrier Start" to "Carrier Stop" on/off.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:STATe
on page 608
Carrier Start
Defines the start index of the carrier range to which the assistant settings are intended
to apply.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:STARt
on page 608
Carrier Stop
Defines the stop index of the carrier range to which the assistant settings are intended
to apply.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:STOP
on page 608
Gain Start
Sets the gain of the carrier marked by "Carrier Start".
Remote command:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:POWer[:STARt]
on page 607
Gain Step
Sets the step width that is used to increment the gain
The resulting carrier gain in the carrier table equals:
Gai n* Gain Step
where n ranges from 0 to (Carrier Stop - Carrier Start).
Baseband Signal - Baseband Block