R&S SMJ100A, Operating Manual

Page: 366 / 874

Instrument Function
R&S
®
SMJ100A
350 Operating Manual 1403.7458.32 ─ 14
Remote command:
[:SOURce<hw>]:BB:DM:FILTer:OSAMpling:AUTO
on page 645
[:SOURce<hw>]:BB:DM:FILTer:OSAMpling
on page 644
More - Filter
Calls the menu for displaying the filter characteristic of the currently selected filter.
Load User Filter
Calls the menu "Select List File User Filter" for selecting a user-defined filter file with
extansion
*.vaf
(see "User filter" on page 338). The button is only available if filter
type "USER" is selected.
The button "File" "Manager" calls the "File" "Manager" menu. The "File" "Manager"
menu is used to display and delete files.
Remote command:
[:SOURce<hw>]:BB:DM:FLISt:SELect
on page 662
[:SOURce<hw>]:BB:DM:FLISt:CATalog?
on page 655
[:SOURce<hw>]:BB:DM:FLISt:DELete
on page 661
Current Filter Response
Displays the filter characteristic of the currently selected filter.
Remote command:
n.a.
Power Ramp
The lower part of the"Custom Digital Modulation" menu is used for setting triggers,
marker and clocks, as well as for power ramp settings.
Power Ramp Control
Calls the power ramp control menu (see "Power Ramp Control" on page 358).
Remote command:
n.a.
Trigger/Marker
Calls the "Trigger/Marker/Clock" dialog, used to select the trigger source, set the time
delay on an external trigger signal and configure the marker output signals.
See "Trigger/Marker/Clock" on page 361.
Remote command:
n.a.
Baseband Signal - Baseband Block