R&S SMJ100A, Operating Manual

Page: 358 / 874

Instrument Function
R&S
®
SMJ100A
342 Operating Manual 1403.7458.32 ─ 14
Fast Save
Determines whether the instrument performs an absolute or a differential storing of the
settings.
Enable this function to accelerate the saving process by saving only the settings with
values different to the default ones.
Note: This function is not affected by the "Preset" function.
Remote command:
[:SOURce<hw>]:BB:DM:SETTing:STORe:FAST
on page 665
[:SOURce<hw>]:BB:ARBitrary:MCARrier:SETTing:STORe:FAST
on page 610
refer to the description of frimware options for the syntax of the corresponding SCPI
commands
Data Source
The data source is selected and set in the "Data Source" section. The parameters
offered depend on the data source selected. The More button opens a submenu for
calling the data editor and the file manager.
Data Source
Selects the data source (see Chapter 5.8.1, "Data and Signal Sources in Baseband" ,
on page 313).
You may choose from the following data sources:
"All 0, All 1" 0 data or 1 data is internally generated.
"PRBS, PRBS
Type" PRBS data in accordance with the IUT-T with period lengths between
2
9 -1 and 2 23 -1 are internally generated.
The length is selected in the "PRBS Type" input box.
Remote command:
[:SOURce<hw>]:BB:DM:PRBS[:LENGth]
on page 629
"Pattern" A user-definable bit pattern with a maximum length of 64 bits is inter-
nally generated.
The bit pattern is defined in the "Pattern" input box.
Baseband Signal - Baseband Block