R&S SMJ100A, Operating Manual

Page: 163 / 874

Instrument Function
R&S
®
SMJ100A
147 Operating Manual 1403.7458.32 ─ 14
Remote command:
:SYSTem:COMMunicate:GPIB[:SELF]:ADDRess
on page 795
Visa Resource Strings
Displays the visa resource strings, used for remote control of the instrument. Each
interface requires an individual unique address, to identify the instrument for remote
control.
Remote command:
:SYSTem:COMMunicate:HISLip:RESource?
on page 797
:SYSTem:COMMunicate:NETWork:RESource?
on page 796
:SYSTem:COMMunicate:SOCKet:RESource?
on page 797
:SYSTem:COMMunicate:GPIB:RESource?
on page 796
Goto Local
Switches the instrument to operate in local control mode.
Switching from remote to local control mode can be also done with one of the following
actions:
●
manually with the LOCAL key on the front panel
●
with the interface command
&GTL
via the remote control interface
●
with the key combination CTRL + Q.
Remote command:
&GTL
5.2.3.14 LXI Status
The "LXI - LAN eXtensions for Instruments - Status..." dialog displays the settings and
status of the LAN and allows to reset the LAN connection.
For more information on LXI, see Chapter 2.9, "LXI Configuration" , on page 60.
LAN Status
The LED indicates the LXI status.
The LAN Status is also indicated with the LED "LAN Status" on the front panel of the
instrument.
"green" normal operation
General Instrument Settings