R&S SMCVB-K163, User Manual

Page: 50 / 92

Performing DVB-T Signal Generation Tasks
R&S
®
SMCVB-K163
50 User Manual 1179.0997.02 ─ 02
You can further specify the payload of the stuffing data, see "Test Signal > Payload
Test/Stuff."
The R&S SMCV100B is prepared for receiving TS data, that is input at the "User 1"
connector.
Monitor TS data stream properties in the "Info" side tab, see Chapter 5.2.2, "How to
Monitor an External TS Input Signal" , on page 51.
5.1.3 How to Generate an Internal TS Signal
To play a TS file with the "TS Player"
1. Select "Input Signal > Source > TS Player".
The "TS Player" button appears below.
2. Click "TS Player".
The "TS Player" dialog for playing TS data files opens.
3. Click "Play" to play the default file
DIVER.trp
.
Playing the file requires no option.
5.2 Monitoring the Input Signal
This chapter provides an overview of the different input signals, that the
R&S
SMCV100B uses as modulation data.
● How to Monitor External IP Input Data ....................................................................51
● How to Monitor an External TS Input Signal ........................................................... 51
● How to Monitor an Internal TS Player Signal .......................................................... 52
Monitoring the Input Signal