DVB-T Configuration and Settings
R&S
®
SMCVB-K163
43
User Manual 1179.0997.02 ─ 02
4.8
Local IP Data Network Settings
Access:
1. Select "Input Signal > General > Source > External".
2. Select "Input Signal > General > Input > IP"
3. Select "Input Signal > IP Channel x > Local IP Data Network".
The tab provides access to local IP data settings necessary to configure the board
address.
The remote commands necessary to configure local IP data network settings are
described in
Chapter 5.1.1, "How to Apply an External IP Input Signal"
Settings:
Network Status
Indicates that the instrument is connected to the network.
If the instrument is disconnected, try "Restart Network".
Remote command:
:SYSTem:COMMunicate:BCIP<hw>:NETWork:STATus
Local IP Data Network Settings