R&S SMCVB-K163, User Manual

Page: 31 / 92

DVB-T Configuration and Settings
R&S
®
SMCVB-K163
31 User Manual 1179.0997.02 ─ 02
8 bit are used for this purpose. The most significant byte is transferred in the OFDM
frames 1 and 3. The least significant byte is transferred in the OFDM frames 2 and 4,
see Table 4-5 .
Table 4-5: TPS cell ID in binary form
TPS bit number TPS cell ID
OFDM frame 1 and 3 OFDM frame 2 and 4
s40 (15) - MSB (7)
s41 (14) (6)
s42 (13) (5)
s43 (12) (4)
s44 (11) (3)
s45 (10) (2)
s46 (9) (1)
s47 (8) (0) - LSB
MSB = most significant bit, LSB = least significant bit
Remote command:
[:SOURce<hw>]:BB:DVBT:CELL:ID
on page 72
TPS Reserved State
Enables or disables the reserved TPS bits.
See "TPS Reserved Bits (Hex)" on page 31.
Remote command:
[:SOURce<hw>]:BB:DVBT:TPSReserved:STATE
on page 73
TPS Reserved Bits (Hex)
Sets the reserved bits in one-digit hexadecimal format.
4 bit are used for this purpose, see Table 4-5 .
Table 4-6: TPS reserved bits in binary form
TPS bit number TPS reserved bits
s50 (3)
s51 (2)
s52 (1)
s53 (0)
Remote command:
[:SOURce<hw>]:BB:DVBT:TPSReserved:VALue
on page 73
Time Slicing
Requires "Coding > DVB-H > On".
Enables/disables time slicing.
TPS Settings