R&S SMCVB-K163, User Manual

Page: 23 / 92

DVB-T Configuration and Settings
R&S
®
SMCVB-K163
23 User Manual 1179.0997.02 ─ 02
Remote command:
[:SOURce<hw>]:BB:DVBT:PIDTestpack
on page 64
PID (Hex)
Sets the PID .
Remote command:
[:SOURce<hw>]:BB:DVBT:PID
on page 64
Payload Test/Stuff
Defines the payload area content of the TS packet.
For "Source > Test Signal", the packet is a test packet.
For "Stuffing > On", the packet is a null packet. Null packets are inserted into the exter-
nal transport stream to adapt the stream data rate.
"PRBS" PRBS data in accordance with ITU-T O.151
"0x00"
Exclusively 00 (hex) data
"0xFF" Exclusively FF (hex) data
Remote command:
[:SOURce<hw>]:BB:DVBT:PAYLoad
on page 63
PRBS
Sets the length of the PRBS sequence.
You can select a PRBS 15 or a PRBS 23 sequence as specified by ITU-T O.151 .
Remote command:
[:SOURce<hw>]:BB:DVBT:PRBS[:SEQuence]
on page 64
4.2.4 IP Channnel x Settings
Access:
1. Select "Input Signal > General".
2. Select "Source > External"
3. Select "Input > IP"
Input Signal Settings