R&S SMCVB-K161, User Manual

Page: 63 / 81

Remote-Control Commands
R&S
®
SMCVB-K161
63 User Manual 1179.1035.02 ─ 02
Example: See Example "Configure coding network properties" on page 61.
Manual operation: See "Network ID (Hex)" on page 25
[:SOURce<hw>]:BB:ATSM:BURY:RATio <MarketID>
Sets the power with that the watermark is added to the payload signal.
Parameters:
<MarketID> DB21 | DB24 | DB27 | DB30 | DB33 | DB36 | DB39
*RST:
DB30
Example: See Example "Configure coding network properties" on page 61.
Manual operation: See "Bury Ratio" on page 26
[:SOURce<hw>]:BB:ATSM:TRANsmission <Transmission>
Enables/disables MTXID transmission.
Parameters:
<Transmission> 0 | 1 | OFF | ON
*RST:
0
Example: See Example "Configure coding network properties" on page 61.
Manual operation: See " MTXID Transmission" on page 26
[:SOURce<hw>]:BB:ATSM:MTXid:TID <TransmitterID>
Sets the transmitter ID for the MTXID transmission.
Parameters:
<TransmitterID> integer
Range:
0 to 31
*RST: 0
Example: See Example "Configure coding network properties" on page 61.
Manual operation: See " Transmitter ID (Hex)" on page 26
[:SOURce<hw>]:BB:ATSM:MTXid:MID <MarketID>
Sets the market ID for the transmission.
Parameters:
<MarketID> integer
Range:
0 to 511
*RST: 0
Example: See Example "Configure coding network properties" on page 61.
Manual operation: See " Market ID (Hex)" on page 26
Coding Commands