Manual Operation
R&S
®
SMB100A
83
Operating Manual 1407.0806.32 ─ 21
access to the files occurs in the individual menus where only the relevant type of file is
available. See
Chapter 4.7.2.1, "Extensions for User Files"
on page 85 for an over-
view of the supported file extensions.
The user data can be roughly divided into the following data types:
●
Settings
Instrument settings can be saved and loaded. In case of saveing, the current set-
ting is saved to the specified file.
●
Lists
Lists, e.g. user correction lists, can be loaded. They can be generated either exter-
nally or internally. For internal generation, a new list must be created in the "File
Select" dialog which will then be edited in the list editor of the individual menu.
For more information, refer to:
●
Chapter 4.8, "Legend of Front-Panel Controls"
on page 86 for an overview of key
functions and a cross-reference between the front panel keys and the keyboard
shortcuts
●
to section "Instrument Functions" for a detailed description of key functions.
Accessing files with user data
1. To access an editable user data file, select the "Save/Recall" or "File Manger" func-
tion in the individual dialog.
2. To access a loadable data file, select the "Select/New" or "File Manager" function
in the individual dialog.
3. To access the "File Manager" function, press the SETUP (CTRL+E) key and select
"Save/Recall > File Manager".
A "File Select" window for loading, saving or creating a file or the "File Manager"
dialog for managing all files is displayed.
Saving and loading of all instrument settings
All instrument settings are saved and loaded in the "File" menu.
To access the "File" menu, press the FILE (CTRL+S) key.
For more information, see
Chapter 5.2.8, "Storing and Loading Instrument Data - File
File Management
