Status Information, Error Messages and Troubleshooting
R&S
®
SMB100A
487
Operating Manual 1407.0806.32 ─ 21
Error
Code
Error
Description
Remedy
460
Cannot open file
The selected file can not be opened.
Check the path and file name.
461
Cannot write file
The file can not be written.
Check if the file is read-only.
462
Cannot read file
The file can not be read.
Check if the file contents are
compatible with the file type.
463
Filename missing
The required operation cannot be
executed because the file name is not
specified.
A file name has to be entered
when creating a new list.
464
Invalid filename exten-
sion
The file extension is not valid for the
required operation.
Check the file extension.
For instance, the file extension
for waveform list files is
*.wv
. It
is not possible to enter another
file extension when storing a list.
465
File contains invalid
data
The selected file contains data that is
not valid for the file type.
The file extension determines the
data that is valid for this file type. If
the file extension is changed the lists
are no longer recognized and the data
are therefore invalid.
Example: the extension of a wave-
form file (=
*.wv
) was changed to
*.txt
Check the file extension.
Stereocoder error messages
An error occurred concerning the stereo coder option R&S
SMB-B5. Refer to the ser-
vice manual, chapter 3, section "Troubleshooting" for error correction.
9.5 Resolving Network Connection Failures
Several issues may cause failures in the network connection to the instrument. This
section lists the most likely reasons and the recommended solutions.
Common reasons for network connection failures
●
Network connecting cables and cable connectors of poor quality
●
Incompatibility between the network interface of the R&S
SMB and certain
switches or routers available on the market
●
An invalid IP address assigned to the instrument
Resolving Network Connection Failures
