R&S SMB100A, Operating Manual

Page: 456 / 528

Remote Control Commands
R&S
®
SMB100A
441 Operating Manual 1407.0806.32 ─ 21
:SYSTem:COMMunicate:GPIB:RESource?
Queries the visa resource string for remote control via the GPIB interface.
To change the GPIB address, use the command
:SYSTem:COMMunicate:GPIB[:
SELF]:ADDRess
.
Return values:
<Resource> string
Example: SYSTem:COMMunicate:GPIB:RESource?
queries the VISA resource string.
Response:
"GPIB::28::INSTR"
'
Usage: Query only
Manual operation: See "Visa Resource Strings" on page 110
:SYSTem:COMMunicate:NETWork:RESource?
Queries the VISA resource string, used for remote control of the instrument with
VXI-11 protocol.
Return values:
<Resource> string
Example: SYSTem:COMMunicate:NETWork:RESource?
Response:
"TCPIP::192.1.2.3::INSTR"
Usage: Query only
Manual operation: See "Visa Resource Strings" on page 110
:SYSTem:COMMunicate:HISLip:RESource?
Queries the VISA resource string, used for remote control of the instrument with
HiSLIP protocol.
Return values:
<Resource> string
Example: SYSTem:COMMunicate:HISLip:RESource?
Response:
"TCPIP::192.1.2.3::hislip0::INSTR"
Usage: Query only
Manual operation: See "Visa Resource Strings" on page 110
:SYSTem:COMMunicate:USB:RESource?
Queries the visa resource string for remote control via the USB interface.
Return values:
<Resource> string
SYSTem Subsystem