manualshive.com logo in svg

R&S SMA100B, User Manual, Page: 303 / 581

Share
Download
R&S SMA100B User Manual Download Page 303

Network Operation and Remote Control

R&S

®

SMA100B

288

User Manual 1178.3834.02 ─ 03

See 

Chapter 11.11.3, "SCPI Recording Export Settings"

, 

on page 288.

The "SCPI Recording List" shows the last recorded and exported commands.

Export

Opens the 

SCPI Recording Export

 dialog for configuring the file parameters for export.

Remove All, Remove First, Remove Last

Deletes the either first, the last or all recorded SCPI commands.

To remove several recorded commands, repeat the removing.

For post processing, export the SCPI command list in a file, see 

Chapter 11.15, "How

to Convert and Save SCPI Lists"

, 

on page 294.

11.11.3 SCPI Recording Export Settings

Scripts are configured and saved in the "SCPI Recording Export" dialog.

This dialog opens automatically, when you stop recording.

1. To access this dialog, select "Show SCPI Recording List" in the context-sensitive

menu.

The "SCPI Recording List" dialog opens.

 

Automating Tasks with Remote Command Scripts

Summary of Contents for SMA100B






































































































































































































































































































































































































































































































































































































Reviews:

No comments