Remote Control Commands
R&S
®
SGT100A
486
User Manual 1176.8674.02 ─ 07
Setting parameters:
<Key>
integer
The respective functions are disabled when the protection level
is activated. No password is required for activation. A password
must be entered to deactivate the protection level. The pass-
word for the first level is 123456.
This protection level can be used to lock-out internal adjust-
ments.
Example:
SYSTem:PROTect1:STATe ON
activates protection level 1. Internal adjustments are only possi-
ble after deactivating the lock-out.
SYSTem:PROTect1:STATe OFF,123456
deactivates protection level 1. Internal adjustments are enabled
again.
:SYSTem:DATE
<Year>, <Month>, <Day>
Queries or sets the date for the instrument-internal calendar.
This parameter is protected, in order to prevent accidental changes.
It can be accessed with protection level 1, see
Parameters:
<Year>
<year>,<month>,<day>
<Month>
integer
Range:
1 to 12
<Day>
integer
Range:
1 to 31
Example:
SYST:DATE?
Response:
"2011,05,01"
it is the 1st of May, 2011.
Manual operation:
See
:SYSTem:TIME
<Hour>, <Minute>, <Second>
Queries or sets the time for the instrument-internal clock.
The parameter is protected, in order to prevent accidental changes.
It can be accessed with protection level 1, see
Parameters:
<Hour>
0...23,0...59,0...59
Range:
0 to 23
SYSTem Subsystem
