R&S SGT100A, User Manual

Page: 469 / 593

Remote Control Commands
R&S
®
SGT100A
438 User Manual 1176.8674.02 ─ 07
Parameters:
<VppMax> float
Range:
0.04 to 8
Increment: 1E-3
*RST:
1
Example: See Example "Generating an RF envelope signal and defining
the shaping function" on page 432
Manual operation: See "V
pp
Max" on page 163
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:EMF[:STATe] <EmfState>
Defines whether the EMF or the voltage value is used.
Parameters:
<EmfState> 0 | 1 | OFF | ON
*RST:
1
Example: See Example "Generating an RF envelope signal and defining
the shaping function" on page 432
Manual operation: See "EMF" on page 162
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:RIN <InputResistance>
Sets the input impedance R
in
of the used external DC modulator.
Parameters:
<InputResistance> float
Range:
50|100 to 1E6
Increment: 0.1
*RST:
50
Example: See Example "Generating an RF envelope signal and defining
the shaping function" on page 432
Manual operation: See "R
in
" on page 162
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:ENVelope:TERMination <Termination>
Sets how the inputs of the DC modulator are terminated.
Parameters:
<Termination> GROund | WIRE
*RST:
GROund
Example: See Example "Generating an RF envelope signal and defining
the shaping function" on page 432
Manual operation: See "Termination" on page 162
SOURce Subsystem