Remote Control Commands
R&S
®
SGT100A
424
User Manual 1176.8674.02 ─ 07
Parameters:
<Q>
float
Range:
-10 to 10
Increment: 0.01
*RST:
0
Manual operation:
See
[:SOURce]:IQ:IMPairment:QUADrature[:ANGLe]
<Angle>
Sets the quadrature offset for the digital I/Q signal.
Parameters:
<Angle>
float
Range:
-10 to 10
Increment: 0.01
*RST:
0
Manual operation:
See
[:SOURce]:IQ:IMPairment[:STATe]
<State>
Activates/ deactivates the three impairment or correction values LEAKage, QUADra-
ture and IQRatio for the baseband signal prior to input into the I/Q modulator.
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
0
[:SOURce]:IQ:IMPairment:SWAP[:STATe]
<State>
When set to ON, this command swaps the I and Q channel for an external modulation
signal.
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
0
Manual operation:
See
[:SOURce]:IQ:STATe
<State>
Switches the I/Q modulation on and off.
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
0
Manual operation:
See
SOURce Subsystem
