Remote Control Commands
R&S
®
SGT100A
397
User Manual 1176.8674.02 ─ 07
Parameters:
<Filename>
string
Example:
MMEM:CDIR '/var/user/waveform'
sets the default directory.
BB:ARB:WSEG:CONF:SEL 'new'
create configuration file
new.inf_mswv
in the default directory.
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CREate
<FilenameInput>
Creates a multi segment waveform using the current settings of the specified configu-
ration file. The multi segment waveform is saved into the file defined in the configura-
tion file. The file extension is
*.wv
.
Setting parameters:
<FilenameInput>
string
Example:
MMEM:CDIR '/var/user/'
sets the default directory
BB:ARB:WSEG:CONF:SEL 'new'
creates the configuration file
new.inf_mswv
in the default
directory.
BB:ARB:WSEG:CONF:SEGM:APP 'arb1.wv'
'includes waveform
arb1.wv
as segment 1 in the configuration
file. The waveform must be available in the default directory.
BB:ARB:WSEG:CONF:OFIL 'multi_wv1'
defines the file name
multi_wv1.wv
for the multi segment
waveform.
BB:ARB:WSEG:CRE '/var/user/new.inf_mswv'
creates multi segment waveform
multi_wv1.wv
using the set-
tings of the configuration file
new.inf_mswv
.
Usage:
Setting only
Manual operation:
See
[:SOURce<hw>]:BB:ARBitrary:WSEGment:LMODe
<LevelMode>
Sets how the segments are leveled.
Parameters:
<LevelMode>
HIGHest | UNCHanged
*RST:
HIGHest
Example:
:SOURce1:BB:ARBitrary:WSEGment:LMODe HIGHest
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NAME?
This command queries the name of the waveform of the currently output segment of
the multi segment waveform.
SOURce Subsystem
