Remote Control Commands
R&S
®
SGT100A
325
User Manual 1176.8674.02 ─ 07
<HeapAvailableKb> integer
Available heap memory.
Usage:
Query only
:MMEMory:LOAD:STATe
<SavRclStateNumb>, <file_name>
Loads the specified file stored under the specified name in an internal memory.
After the file has been loaded, the instrument setting must be activated using an
*RCL
command.
Setting parameters:
<SavRclStateNumb> Determines to the specific <number> to be used with the
*RCL
command, e.g.
*RCL 4
.
<file_name>
String parameter to specify the file name with extension
*.savrcltxt
.
Usage:
Setting only
:MMEMory:MDIRectory
<Directory>
Creates a subdirectory for mass memory storage in the specified directory. If no direc-
tory is specified, a subdirectory is created in the default directory. This command can
also be used to create a directory tree.
Setting parameters:
<Directory>
string
String parameter to specify the new directory.
Usage:
Event
:MMEMory:MOVE
<SourceFile>, <DestinationFile>
Moves an existing file to a new location or, if no path is specified, renames an existing
file.
Setting parameters:
<SourceFile>
string
String parameter to specify the name of the file to be moved.
<DestinationFile>
string
String parameters to specify the name of the new file.
Usage:
Event
SCPI confirmed
:MMEMory:MSIS
<Msis>
Defines the drive or network resource (in the case of networks) for instruments with
windows operating system, using
msis
(MSIS = Mass Storage Identification String).
MMEMory Subsystem
