R&S SGT100A, User Manual

Page: 104 / 593

Understanding the R&S SGMA-GUI Software
R&S
®
SGT100A
73 User Manual 1176.8674.02 ─ 07
:INSTruments:SCAN <State>
Triggers a scan function and searches for instruments connected to the remote com-
puter via all of the available interfaces.
Parameters:
<State> number
1 = triggers the scan function, 0 = aborts the running scan proc-
ess
The query command returns 1 as long as scan is running; 0 indi-
cates completed scan process.
Example: See Chapter 6.6.1, "Configuring Instruments in the R&S SGMA-
GUI" , on page 68.
Manual operation: See "Scan" on page 50
:INSTruments:SCAN:HNPRefix <Prefix>
Sets the prefix the searched host names begin with.
Parameters:
<Prefix> string
Example: See Chapter 6.6.1, "Configuring Instruments in the R&S SGMA-
GUI" , on page 68.
Manual operation: See "Scan LAN instruments with host name prefix" on page 51
:INSTruments:SERial <Serial>
Enters the serial number as instrument's identification while using the USB interface for
remote control.
Parameters:
<Serial> <SerialNumberInstr#1>, <SerialNumberInstr#2>,...
Example: See Chapter 6.6.1, "Configuring Instruments in the R&S SGMA-
GUI" , on page 68.
Manual operation: See "Serial Number" on page 54
:INSTruments:TYPE <Type>
Selects the instrument's family.
Parameters:
<Type> List of CHAR-Data
<TypeInstr#1>,<TypeInstr#2>,...
Example: See Chapter 6.6.1, "Configuring Instruments in the R&S SGMA-
GUI" , on page 68.
Manual operation: See "Available Instruments" on page 50
Remote Control of the R&S SGMA-GUI