R&S SGT100A, User Manual

Page: 102 / 593

Understanding the R&S SGMA-GUI Software
R&S
®
SGT100A
71 User Manual 1176.8674.02 ─ 07
Manual operation: See "Available Instruments" on page 50
:INSTruments:COUNt?
Queries the number of the currently available instruments.
Return values:
<Count> float
Range:
0 to 12
Example: See Chapter 6.6.1, "Configuring Instruments in the R&S SGMA-
GUI" , on page 68.
Usage: Query only
Manual operation: See "Available Instruments" on page 50
:INSTruments:EACCess[:STATe] <State>
"Locks" the instruments, meaning the instrument is reserved and can be operated
exclusively from the remote PC that sent this SCPI command.
Tip: It is recommended to lock the instrument prior to further configuration.
Parameters:
<State> List of BOOL-values
<LockInstr#1>,<LockInstr#2>,...
0,1,OFF,ON
Example: See Chapter 6.6.1, "Configuring Instruments in the R&S SGMA-
GUI" , on page 68.
Manual operation: See "Exclusive Access" on page 53
:INSTruments:MAPPing:FILE <File>
Saves the list of the available instruments in a mapping file. Mapping files are stored
with the predefined file extension
.map
; the file extension may be omitted.
The file is saved in the default directory. Use the command
MMEM:CDIRectory
to
change the default directory or specify the complete path.
Parameters:
<File> string
Example: See Chapter 6.6.1, "Configuring Instruments in the R&S SGMA-
GUI" , on page 68.
Manual operation: See "Export" on page 51
:INSTruments:NAME <Name>
Selects the alias name of the instruments, i.e. sets the "Symbolic Name".
Remote Control of the R&S SGMA-GUI