manualshive.com logo in svg

R&S RTO6, User Manual

Share
Download
R&S RTO6 User Manual Download Page 984

Mixed signal option (MSO, R&S

 

RTO6-B1)

R&S

®

RTO6

984

User Manual 1801.6687.02 ─ 05

14

 

Mixed signal option (MSO, R&S

 

RTO6-B1)

The Mixed Signal Option R&S

 

RTO6-B1 adds logic analyzer functions to the classical

oscilloscope functions. Using the MSO option, you can analyze and debug embedded
systems with mixed-signal designs that use analog signals and correlated digital sig-
nals simultaneously.

The Mixed Signal Option provides 16 digital channels grouped in two logic probes
(pods) with 8 channels each. The instrument ensures that analog and digital wave-
forms are time-aligned and synchronized so that critical timing interactions between
analog and digital signals can be displayed and tested. The automatic alignment com-
pensates the skew between the probe connectors of the analog channels and the
probe boxes of the digital channels.

Logic probes provided by Rohde

 

&

 

Schwarz are recognized by the instrument. The

information on each recognized probe is shown under "Menu" "Settings" > "Mainte-
nance" > "Hardware" > "Advanced" > "Logic Probes".

Summary of Contents for RTO6






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands