Protocol analysis
R&S
®
RTO6
671
User Manual 1801.6687.02 ─ 05
7. Enter the "Threshold" and the "Hysteresis".
8. Enable "Decode".
13.11.3
CXPI trigger
13.11.3.1
CXPI trigger settings
Access: [Bus] > "Shortcuts" tab > "Setup trigger"
Make sure that:
●
In the [Bus] > "Setup" tab:
–
The correct "Protocol" is selected.
–
The data sources of the serial bus are channel signals.
●
In the "Trigger" > "Setup" tab:
–
The "Trigger on" = "Single event"
–
The trigger "Source" = "Serial bus".
–
The correct "Serial bus" is selected.
Trigger type
Selects the trigger type for CXPI analysis.
Remote command:
Frame Start ← Trigger type
Triggers on a frame start.
CXPI (option R&S
RTO6-K520)
