Remote control commands
R&S
®
RTO6
2333
User Manual 1801.6687.02 ─ 05
Parameters:
<ThresholdHigh>
Range:
-10 to 10
Increment: 1E-3
*RST:
0.15
Default unit: V
BUS<m>:EBTB:DIFFerential:THRLow
<ThresholdLow>
Sets the low threshold of the signal, if
BUS<m>:EBTB:TYPE DIFFerential
.
Suffix:
<m>
.
1..4
Parameters:
<ThresholdLow>
Range:
-10 to 10
Increment: 1E-3
*RST:
-0.15
Default unit: V
BUS<m>:EBTB:DISF
<DisplayFormat>
Selects the display format for the results in the decode table and for the results of
.
Suffix:
<m>
.
1..4
Parameters:
<DisplayFormat>
KD | EB | TB
KD: K/D codes
EB: 8-bit pattern
TB: 10-bit pattern
*RST:
KD
BUS<m>:EBTB:DMINus:SOURce
<SourceDminus>
Selects the D- source of the provided single ended signal, if
BUS<m>:EBTB:TYPE
SINGle
is set.
Suffix:
<m>
.
1..4
Parameters:
<SourceDminus>
NONE | C1W1 | C2W1 | C3W1 | C4W1 | M1 | M2 | M3 | M4 |
M5 | M6 | M7 | M8 | R1 | R2 | R3 | R4
Usage:
Asynchronous command
BUS<m>:EBTB:DMINus:THReshold
<ThresholdDminus>
Sets the low threshold (D-) of the signal, if
BUS<m>:EBTB:TYPE SINGle
.
Protocols
