Remote control commands
R&S
®
RTO6
2172
User Manual 1801.6687.02 ─ 05
Parameters:
<DataPosOperator> ANY | OFF | EQUal
ANY = OFF
The position of payload data is not relevant for the search condi-
tion.
*RST:
ANY
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:USB:DPOSition
<SearchName>,<DataPosition>
SEARch:TRIGger:USB:DPOSition?
<SearchName>
Specifies the position within a payload data packet, in which a special data pattern is to
be searched.
Parameters:
<DataPosition>
Range:
0 to 1024
Increment: 1
*RST:
0
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:USB:ECONdition
<SearchName>,<EndpointOptor>
SEARch:TRIGger:USB:ECONdition?
<SearchName>
Sets the operator to set a specific endpoint or an endpoint range. The endpoint values
are set with
.
Parameters:
<EndpointOptor>
OFF | ANY | EQUal | NEQual | LTHan | LETHan | GTHan |
GETHan | INRange | OORange
EQUal | NEQual | LTHan | LETHan | GTHan | GETHan
Equal, Not equal, Less than, Less than or equal, Greater than,
Greater than or equal. These conditions require one endpoint
value to be set using
INRange | OORange
In range, out of range. These conditions require a range of end-
point values to be set using
*RST:
OFF
Parameters for setting and query:
<SearchName>
Protocols
