Remote control commands
R&S
®
RTO6
2068
User Manual 1801.6687.02 ─ 05
Parameters:
<MaskMin>
TRIGger<m>:RFFE:INTerrupt
<Interrupt>
Sets the interrupt pattern for the interupt summary and notification trigger type.
Parameters:
<Interrupt>
TRIGger<m>:RFFE:ERRor:BP
<BusParkError>
Enables the trigger on a bus park error - when an incorrect bus parlk cycle has been
found.
Parameters:
<BusParkError>
ON | OFF
*RST:
ON
TRIGger<m>:RFFE:ERRor:LENGth
<LengthError>
Enables the trigger on a length error - when an incorrect length of the command
sequence has been found.
Parameters:
<LengthError>
ON | OFF
*RST:
ON
TRIGger<m>:RFFE:ERRor:NOResponse
<NoResponse>
Enables the trigger on any No Response Frame.
Parameters:
<NoResponse>
ON | OFF
*RST:
ON
TRIGger<m>:RFFE:ERRor:PARity
<ParityError>
Enables the trigger on incorrect parity bits.
Parameters:
<ParityError>
ON | OFF
*RST:
ON
TRIGger<m>:RFFE:ERRor:SSC
<SSCError>
Enables the trigger on an SSC error - when no valid SSC sequence has been found
after the idle time.
Protocols
