Remote control commands
R&S
®
RTO6
2019
User Manual 1801.6687.02 ─ 05
T100
Sets the thresholds to the default values for 10BASE-T
(100
meters): upper threshold to 0.75
V, lower threshold to
-0.75
V
TX0
Sets the thresholds to the default values for 100BASE-TX
(0
meters): upper threshold to 0.5
V, lower threshold to -0.5
V
TX100
Sets the thresholds to the default values for 100BASE-TX
(100
meters): upper threshold to 0.35
V, lower threshold to
-0.35
V
MANual
Allows to set individual threshold voltage levels
*RST:
T0
BUS<m>:ETHernet:BITRate
<BitRateValue>
Sets the bit rate value that defines the transmission speed in bits per second.
Suffix:
<m>
.
1..4
Parameters:
<BitRateValue>
Range:
10000 to 150000000
Increment: 1000
*RST:
10000000
Default unit: bps
24.17.16.2
Trigger
The trigger suffix <m> is always 1 and can be omitted. It selects the trigger event: Only
the A-trigger is available for triggering on serial buses.
To trigger on a serial bus, make sure that:
●
SBUS
.
●
The sources of the serial bus are channel signals: use
BUS<m>:...:SOURce
commands.
●
Decoding is enabled:
ON
.
....................................................................................... 2020
....................................................................................2020
.............................................................................. 2020
TRIGger<m>:ETHernet:ERRor:LENGth
..........................................................................2021
TRIGger<m>:ETHernet:ERRor:PREamble
......................................................................2021
TRIGger<m>:ETHernet:FRAMe:CCONdition
...................................................................2021
TRIGger<m>:ETHernet:FRAMe:CMAX
.......................................................................... 2022
TRIGger<m>:ETHernet:FRAMe:CMIN
............................................................................2022
TRIGger<m>:ETHernet:FRAMe:DCONdition
...................................................................2022
TRIGger<m>:ETHernet:FRAMe:DMAX
.......................................................................... 2022
Protocols