Remote control commands
R&S
®
RTO6
1671
User Manual 1801.6687.02 ─ 05
Usage:
Asynchronous command
BUS<m>:SETReflevels
Executes the measurement of reference levels and sets the thresholds to the middle
reference level of the measured amplitude.
Suffix:
<m>
.
1..4
Selects the serial bus.
Usage:
Event
Asynchronous command
BUS<m>:FAUToset
Starts software algorithms for determining the signal threshold levels and bitrate.
Suffix:
<m>
.
1..4
Usage:
Event
Asynchronous command
BUS<m>:RESult
<ShowResultTable>
Opens a table with decoded data of the serial signal. The function affects all protocol
types and requires the option for the analyzed protocol.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<ShowResultTable> ON | OFF
*RST:
ON
Usage:
Asynchronous command
BUS<m>:THReshold
<ShwThresLines>
If ON, the threshold levels are displayed in the diagram.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<ShwThresLines>
ON | OFF
*RST:
OFF
Usage:
Asynchronous command
Protocols
