Remote control commands
R&S
®
RTO6
1639
User Manual 1801.6687.02 ─ 05
SEARch:RESult:SORT[:MODE]
<SearchName>,<SortMode>
SEARch:RESult:SORT[:MODE]?
<SearchName>
Sorts the search result table by x-value position or value of the result.
Parameters:
<SortMode>
POSition | VALue
POSition
Sorts the search result table by the x-value position.
VALue
Sorts the search result table by the value of the result.
*RST:
POSition
Parameters for setting and query:
<SearchName>
Search definition
Usage:
Asynchronous command
SEARch:RESult[:ALL]?
<SearchName>
Returns all search results.
Query parameters:
<SearchName>
Search definition
Return values:
<Data>
List of search results, separated by commas. For each result, six
values are returned:
1. Acquisition index, currently always 0.
2. X-position of the search result
3. Y-position of the search result, currently not relevant
4. Type of the search result (Edge, Glitch, ...)
5. Slope or polarity of the search result
6. For runt, glitch, width, and window searches, the value con-
tains the width. For timeout and interval searches, it contains the
timeout. For transition searches, it contains the slew rate. For all
other searches, the value is not relevant.
If a value is not relevant, 9.91E+37 is returned.
Example:
SEAR:RES? 'Search1'
0,1.5375e-007,-84,Edge,Positive,9.91E+37,
0,5.3e-008,-84,Edge,Positive,9.91E+37
The query returns two search results for edge search on rising
edges at X-position 153,75 ns and 53 ns.
Usage:
Query only
Asynchronous command
Search
