Remote control commands
R&S
®
RTO6
1598
User Manual 1801.6687.02 ─ 05
Query parameters:
<MaskTestName>
Return values:
<AcqsCompleted>
Range:
0 to 100E+24
*RST:
0
Usage:
Query only
Asynchronous command
MTESt:RESult:COUNt:REMaining?
<MaskTestName>
Remaining acquisitions until "Average count / Nx Single count" is reached.
The value is useful if you test a specified number of acquisitions with action "Stop
acquisition" on violation, or if the acquisition has been stopped manually.
Query parameters:
<MaskTestName>
Return values:
<AcqsRemaining>
Range:
0 to 100E+24
*RST:
0
Usage:
Query only
Asynchronous command
MTESt:RESult:COUNt:FWAVeforms?
<MaskTestName>
Returns the number of acquisitions that contained at least one sample hit.
Query parameters:
<MaskTestName>
Return values:
<AcquisitionHits>
Range:
0 to 100E+24
*RST:
0
Usage:
Query only
Asynchronous command
MTESt:RESult:COUNt:FAILures?
<MaskTestName>
Returns the number of sample hits that violated the mask.
Query parameters:
<MaskTestName>
Return values:
<SampleHits>
Range:
0 to 100E+24
*RST:
0
Usage:
Query only
Asynchronous command
Mask testing
