Remote control commands
R&S
®
RTO6
1473
User Manual 1801.6687.02 ─ 05
CURSor<m>:XCOupling
<Coupling>
Defines the positioning mode of the vertical cursor.
Suffix:
<m>
.
1..4
Selects the cursor set.
Parameters:
<Coupling>
ON | OFF
ON
Moving one cursor line moves the other cursor line too. The cur-
sor lines always remain a fixed distance.
OFF
Each cursor line is positioned independently.
*RST:
OFF
Usage:
Asynchronous command
CURSor<m>:Y1Position
<YPosition1>
Defines the position of the lower horizontal cursor line.
If
is enabled, the query returns the measurement
result - the lower vertical value of the waveform.
Suffix:
<m>
.
1..4
Selects the cursor set.
Parameters:
<YPosition1>
Range:
-50 to 50
Increment: 0.01
*RST:
0
Default unit: The unit depends on the type of the waveform.
Usage:
Asynchronous command
CURSor<m>:Y2Position
<YPosition2>
Defines the position of the upper horizontal cursor line.
If
is enabled, the query returns the measurement
result - the upper vertical value of the waveform.
Suffix:
<m>
.
1..4
Selects the cursor set.
Cursor measurements
