Remote control commands
R&S
®
RTO6
1356
User Manual 1801.6687.02 ─ 05
Parameters:
<CMOffset>
Range:
-100E+24 to 100E+24
Increment: 1E-3
*RST:
0
Default unit: V
Usage:
Asynchronous command
PROBe<m>:SETup:NOFFset
<NOffset>
Sets the negative offset to compensate a DC voltage applied to the negative input ter-
minal (Vp) referenced to ground.
Suffix:
<m>
.
1..4
Parameters:
<NOffset>
In "N" probe mode (
NMODe
), this offset is used as channel offset
and considered automatically for correction.
Range:
-100E+24 to 100E+24
Increment: 1E-3
*RST:
0
Default unit: V
Usage:
Asynchronous command
PROBe<m>:SETup:POFFset
<POffset>
Sets the positive offset to compensate a DC voltage applied to the positive input termi-
nal (Vp) referenced to ground.
Suffix:
<m>
.
1..4
Parameters:
<POffset>
In "P" probe mode (
PMODe
), this offset is used as channel offset
and considered automatically for correction.
Range:
-100E+24 to 100E+24
Increment: 1E-3
*RST:
0
Default unit: V
Usage:
Asynchronous command
PROBe<m>:SETup:TERM:STATe
<VoltageState>
Activates the instrument control of the termination voltage.
Suffix:
<m>
.
1..4
Acquisition and setup
