Network operation and remote control
R&S
®
RTO6
1224
User Manual 1801.6687.02 ─ 05
22.1.1
Logon
Windows requires that users identify themselves by entering a user name and pass-
word in a logon window.
If the instrument is connected to the network, you are automatically logged on to the
network when you log on to the operating system. As a prerequisite, the user name
and the password must be identical under Windows and on the network. The instru-
ment provides an auto-logon function that can be configured for standard user and
administrator access. The configuration requires the user name and password.
See also:
The R&S
RTO6 provides two user accounts:
●
"Instrument": an administrator account with unrestricted access to the computer/
domain (default user)
●
"NormalUser": a standard user account with limited access
For both users, the initial password is "894129". It is recommended that you change
the password for both users after initial logon. You can change the password in the
Windows configuration :
"Start" menu > "Settings" > "Accounts" > "Sign-in options".
Make sure to change the password also in the auto-logon of the R&S
RTO6, see
below.
By default, the instrument logs on with administrator account and standard password.
To restrict the access to system functions, you can change the autologon to "Normal-
User".
The following tasks require administrator rights:
●
Configuration of a LAN settings, network connection, and firewall settings
●
Date and time setup
●
Printer installation
●
Firmware update
●
BIOS update
●
Using the web browser
●
Touchscreen calibration
●
Installation of options
●
Moving portable licenses
To configure the auto-logon for a standard user
Default situation: the auto-logon is configured for the administrator ("Instrument").
1. Open "Menu" > "Settings" > "System" > "Users"
2. Set "Logon as" to "User autologon".
3. Enter the "User name":
NormalUser
.
4. Enter the password of the standard user.
Operating system
