manualshive.com logo in svg

R&S RTO2000, Getting Started

Share
Download
R&S RTO2000 Getting Started Download Page 96

Operating the Instrument

R&S

®

RTO2000

96

Getting Started 1332.9719.02 ─ 10

One-click actions

Interactive actions

 

Spectrogram (option R&S RTO-K18)

 

Zone trigger (option R&S RTO-K19)

You can configure the content of the toolbar and hide the date/time display,
see 

Chapter 7.6.2, "Configuring the Toolbar"

, 

on page 94.

The following list describes at first the default toolbar functions and then the addi-
tional functions.

Undo

Undoes the last setting actions step by step. Some actions cannot be

revoked: locking the touchscreen with [Touch Lock], and saving data. The undo
stack is deleted during the following actions: Reloading settings from file, and ref-
erence waveform actions (save, load and preset with active reference waveform).

Redo

Recovers the undo steps in reverse order.

Show Help

Enables the tooltip display. A short description appears when you tap a

parameter in a dialog or result box. To open the corresponding help topic, tap the
"Show Help" button in the lower right corner of the tooltip. See also: 

Chapter 7.11,

"Getting Information and Help"

, 

on page 108.

Graphical Recall (load saveset)

Opens a window to select and load instrument settings that were previ-

ously stored in a saveset. A graphical preview helps you to find the required set-
tings.

Zoom

The zoom icon on the toolbar shows the last selected zoom type. A short tap on
the icon activates the selected zoom.
To use another zoom type, select it in the sidebar.

Standard zoom ← Zoom

Displays a magnified section of the diagram in an additional zoom dia-

gram. It is a display zoom, instrument settings are not changed.

Toolbar

Summary of Contents for RTO2000
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands