R&S RTE Getting Started Download

Page: 14 / 121

Safety and regulatory information

R&S

RTE

Getting Started 1326.1026.02 ─ 10

1.3

Warning messages in the documentation

A warning message points out a risk or danger that you need to be aware of. The
signal word indicates the severity of the safety hazard and how likely it will occur
if you do not follow the safety precautions.

WARNING

Potentially hazardous situation. Could result in death or serious injury if not avoi-
ded.

CAUTION

Potentially hazardous situation. Could result in minor or moderate injury if not
avoided.

NOTICE

Potential risks of damage. Could result in damage to the supported product or to
other property.

1.4

Korea certification class A

이

기기는

업무용

급

)

전자파

적합기기로서

판매자

또는

사용자는

이

점을

주의하

시기

바라며

가정외의

지역에서

사용하는

것을

목적으로

합니다

Korea certification class A

Summary of Contents for RTE


























































































































Search results

Summary of Contents for RTE

Reviews:

Related manuals for RTE

Brands by name

Popular brands

R&S RTE, Getting Started

Search results

Summary of Contents for RTE

Reviews:

Related manuals for RTE

Brands by name

Popular brands