Remote Commands Reference
R&S
®
RTC1000
231
User Manual 1335.7352.02 ─ 02
CALCulate:QMATh:DATA:HEADer?
Returns information on the quick math waveform.
Table 13-2: Header data
Position Meaning
Example
1
XStart in s
-9.477E-008 = - 94,77 ns
2
XStop in s
9.477E-008 = 94,77 ns
3
Record length of the waveform in Samples
200000
4
Number of values per sample interval, usually 1.
1
Return values:
<DataHeader>
Comma-separated value list.
Example:
-9.477E-008,9.477E-008,200000,1
Usage:
Query only
CALCulate:QMATh:DATA:XINCrement?
Returns the time difference between two adjacent samples of the indicated waveform.
The command is relevant for data conversion, if binary data format is defined (FORM
UINT,8|16|32).
Return values:
<Xincrement>
Time in s
Usage:
Query only
CALCulate:QMATh:DATA:XORigin?
Returns the time of the first sample of the indicated waveform. The command is rele-
vant for data conversion, if binary data format is defined (FORM UINT,8|16|32).
Return values:
<Xorigin>
Time in s
Usage:
Query only
CALCulate:QMATh:DATA:YINCrement?
Returns the voltage value per bit of the indicated waveform. The command is relevant
for data conversion, if binary data format is defined (FORM UINT,8|16|32).
Return values:
<Yincrement>
Voltage in V
Usage:
Query only
Quickmath and Reference Waveforms
