Remote Control - OPC
R&S
®
QAR
88
User Manual 1178.7200.02 ─ 04
T1
T2
T3
T4
PLC
Type_Measurement
Configuration
Trigger.MeasureRadome
or
Trigger.Diagnostics
Results_Received
T5
T6
T7
T8
T9
T10
R&S QAR
State.Initializing
State.Ready_ToMeasure
State.Processing
State.Results_Ready
Figure 7-6: Timing diagram for measurements and diagnostics
7.4
Error Handling
Errors can occur during R&S
QAR initialization or while performing measurements.
They are listed in the next subchapters.
7.4.1
Initialization Errors
You cannot solve errors that occur during device initialization. The application saves
the errors to a log, sets the state to
State.Malfunction
and terminates.
Error Handling
