R&S OSP Series, Getting Started

Page: 27 / 37

Instrument Tour
R&S
®
OSP
27 Getting Started 1178.7117.02 ─ 03
The D-Sub 9 trigger connector (next to the label "R Int" in Figure 5-9 ) is only
available in the rear interface panel of the R&S OSP320, not in any other
switch unit. However, triggering is not yet supported by the firmware. The
hardware trigger feature will be added as option R&S
OSP-K100 in the
future.
5.2.4 Rear Panel of the R&S OSP-B200S2 Satellite Unit
For a comprehensive description of this unit, also refer to the R&S OSP-
B200R/B200S2 Satellite System User Manual , available for download at
www.rohde-schwarz.com/manual/osp .
The rear panel of the R&S OSP-B200S2 features various connectors and LEDs.
You cannot insert any modules into the rear panel of the R&S OSP-B200S2.
Figure 5-10: Rear view of the R&S OSP-B200S2 (2HU)
1 = DC power supply connector
2 = Fiber-optic link (FOL) connector for optical remote control
3 = Wired link connector for electrical remote control
4 = Status LEDs for indicating [Power] and [Overheat]
5 = Status LED for indicating [Link / Busy]
Rear Panel View