R&S NRX Series, User Manual

Page: 49 / 514

Configuration for All Measurement Types
R&S
®
NRX
49 User Manual 1178.5566.02 ─ 07
6 Configuration for All Measurement Types
The main measurement dialog offers access to all measurement settings. The layout of
the dialog and how to open is are described in
Chapter 4.1.2, "Main Measurement Dia-
log" , on page 32.
In the navigation pane, you can directly set the unit and the resolution for numeric
results. These settings are also available under "Display".
The settings available for all measurements are described in the following, while mea-
surement-specific settings are described in
Chapter 7, "Measurement Types and
Result Displays" , on page 70.
6.1 Display Settings
Access: Main measurement dialog > "Display"
The available display settings depend on the measurement type and whether the result
display is numeric or graphical:
●
Resolution and unit of a measurement
●
Graphical or numerical display of measured values
●
Scaling parameters for graphical display
The statistics measurement has no "Display" settings, but you can scale the display.
Figure 6-1: Display dialog, example for time gate measurement
Resolution ..................................................................................................................... 50
Unit ................................................................................................................................50
Forward Unit ..................................................................................................................51
Display Settings
www.allice.de Allice Messtechnik GmbH