R&S NRP2, User Manual

Page: 95 / 437

Instrument Functions
R&S
®
NRP2
77 User Manual 1173.9157.02 ─ 03
Fig. 4-14: Offset dialog box
A | B | C | D
Tabs for selecting the sensor.
Note: In remote-control commands, select the sensor with the suffix in command
SENSe<[1]..4>:...
, i.e. choose suffix
1
for channel A, channel
2
for B, and so on.
Global (value)
Enters the global dB offset (dB offset).
Positive values correspond to external losses, negative values to external gains.
SCPI command:
​
[SENSe<[1]..4>]:
​
CORRection:
​
OFFSet
​
on page 266
Global (state)
Activates/deactivates the global offset correction.
SCPI command:
​
[SENSe<[1]..4>]:
​
CORRection:
​
OFFSet:
​
STATe
​
on page 266
Table (name)
Opens an item list containing correction tables.
The instrument provides 10 tables with up to 80 frequency / offset pairs each. The default
labels are "Table 1" to "Table 10"; however, the names can be changed using the table
editor.
SCPI command:
​
[SENSe<[1]..4>]:
​
CORRection:
​
FDOTable[:
​
SELect]
​
on page 267
Table (state)
Activates/deactivates the frequency-dependent offset correction specified in the selected
table.
SCPI command:
​
[SENSe<[1]..4>]:
​
CORRection:
​
FDOTable:
​
STATe
​
on page 267
Data acquisition and parameters