R&S NRP2, User Manual

Page: 123 / 437

Instrument Functions
R&S
®
NRP2
105 User Manual 1173.9157.02 ─ 03
Fig. 4-39: Function & Unit dialog box, sensors are operated in timeslot mode
Timeslot
Determines which timeslot is to be evaluated. Only one value for both channels can be
selected.
Eval.
This selection is only available in the "Trace & Statistics" mode. In the T'Slot Av mode,
evaluation is fixed to 'Avg' = average power in the timeslot.
Selects the measurand:
"Avg" Average power in the timeslot
"Pk" Peak power in the timeslot
"Pk/Avg" Ratio of peak power to average power in the timeslot
SCPI command:
Selection of display
​
DISPlay[:
​
WINDow]<[1]..4>:
​
AVALue
​
on page 239
Reading out values
​
CALCulate<[1]..8>:
​
DATA?
​
on page 223
4.4.3.4 Setting the unit
Combining channels which are operated in different measurement modes
It is possible to define measurement functions based upon channels that are operated in
different measurement modes. This way, the average power within a specific timeslot of
a signal can be related to the average burst power of another signal. Many other combi-
nations are possible. The "Function & Unit" dialog box reflects this situation by offering
only those selection boxes that are needed to clearly define the measurands of the com-
bined channels.
Function & Unit dialog box / Units
The unit for indicating the results can be selected either directly in the "Measurement"
menu or in the "Function & Unit" dialog box.
Configuring measurements