Instrument functions
R&S
®
NGU
97
User Manual 1179.2531.02 ─ 03
5. For ease of future connections, you can add the connection as a remote network
address in the File Explorer.
a) Go to the navigation pane on the left side of File Explorer.
b) Right-click on "This PC" > "Add a network location".
c) Follow the prompt and select "add a custom network location".
d) Enter the URL address mentioned in step 4.
e) Enter a name for this new network location, e.g. "FTP Remote Power Supply".
The new network location is created.
Figure 6-70: New network location
6.19.4
USB connection
Change of USB class
If a change in "USB Class" is detected (i.e. from "TMC" to "CDC" or vice versa), the
rebooting of instrument is necessary to load the correct USB driver.
●
A popup message is displayed: "A reboot of the device is required for this setting to
take effect.".
Figure 6-71: USB class - reboot message
Alternatively, connect a USB cable to the USB port (see
connection. The R&S
NGU supports USB CDC and USB TMC connection.
1. Select "USB Class" from the "Network Connections" dialog.
Interfaces