R&S NGU User Manual Download Page 61

Page: 61 / 214

Instrument functions

R&S

NGU

User Manual 1179.2531.02 ─ 03

4. Activate the "Enabled" menu item.

The R&S

NGU activates the modulation input and highlight the "MOD" icon in white

at the

channel status bar

5. Set the required value for "Gain".

Modulation input sensitivity can be set to 0.5V/V, 1V/V or 2V/V.

6.7

Battery simulator

Instrument option

R&S NGU-K106 (P/N: 3663.0625.02) option is required.
Battery Simulator is available only with R&S NGU201 model.

If battery simulator is active, the function

safety limits

cannot be used.

Equipped with battery simulator option, the R&S

NGU can be used as a battery source

in developing products whereby battery is not ready for testing, such as phones and
portable devices.

The R&S

NGU provides a battery simulator editor to configure the battery model at dif-

ferent states to analyze the products behavior under specific conditions. Different bat-
tery state of charge (SoC) can be simulated rapidly without waiting for the charging or
discharging process of a normal battery when conducting tests.

Figure 6-26: Battery simulator for Ch1

Battery simulator

Summary of Contents for NGU























































































































































































































Search results

Summary of Contents for NGU

Reviews:

R&S NGU, User Manual, Page: 61 / 214

Search results

Summary of Contents for NGU

Reviews: