Remote control commands
R&S
®
NGU
161
User Manual 1179.2531.02 ─ 03
Parameters:
<Channel list>
<list>
Example:
MEAS:VOLT:MAX? (@1)
Queries the maximum measured output voltage at channel 1.
Usage:
Query only
MEASure[:SCALar][:VOLTage][:DC]:MIN?
[<Channel list>]
Queries the minimum measured output voltage.
Parameters:
<Channel list>
<list>
Example:
MEAS:VOLT:MIN? (@1)
Queries the minimum measured output voltage at channel 1.
Usage:
Query only
MEASure[:SCALar][:VOLTage][:DC]:STATistic?
[<Channel list>]
Queries the voltage statistics of the selected channel.
Parameters:
<Channel list>
<list>
Example:
MEAS:STAT?
Queries the voltage statistics at channel 1.
Example:
MEAS:VOLT:STAT? (@1)
Queries the voltage statistics at channel 1.
Usage:
Query only
MEASure:VOLTage:DVM?
[<Channel list>]
Queries the voltmeter measurement (if DVM is enabled).
Query parameters:
<Channel list>
<list>
Example:
MEAS:VOLT:DVM?
-> 3.00E+00
Example:
MEAS:VOLT:DVM? (@1)
Queries the voltmeter measurement at channel 1.
Usage:
Query only
Options:
R&S NGU201 model equipped with R&S NGU-K104 (P/N:
3663.0390.02).
Measurement commands
