Remote control commands
R&S
®
NGU
135
User Manual 1179.2531.02 ─ 03
MIN | MINimum
Minimum value of the impedance at -0.05 ohms.
MAX | MAXimum
Maximum value of the impedance at 100 ohms.
DEF
Default value of the impedance at 0 ohms.
*RST:
0
Default unit: ohm
Parameters for setting and query:
<Channel list>
<list>
Example:
OUTPut:IMPedance 1
OUTPut:IMPedance?
-> 1
Returns output impedance of 1 ohm.
Example:
OUTPut:IMPedance? (@1)
Returns output impedance at channel 1.
OUTPut:IMPedance:STATe
<state>
OUTPut:IMPedance:STATe?
[<Channel list>]
Sets or queries the impedance target for the selected channel.
Parameters:
<state>
0
Deactivates output impedance for the selected channel.
1
Activates output impedance for the selected channel.
Parameters for setting and query:
<Channel list>
<list>
Example:
OUTPut:IMPedance 1
OUTPut:IMPedance:STAT?
-> 1
Returns output impedance state as on.
Example:
OUTPut:IMPedance:STAT? (@1)
Returns output impedance state at channel 1.
OUTPut:MODE
<arg0>[, <Channel list>]
OUTPut:MODE?
[<Channel list>]
Sets or queries the output mode.
Parameters:
<arg0>
AUTO | SINK | SOURce | <list>
Configuration commands
