Instrument functions
R&S
®
NGU
100
User Manual 1179.2531.02 ─ 03
Figure 6-74: License dialog
To install an XML file, proceed as follows:
1. Copy the XML file containing the registered key code into the USB flash drive.
2. Connect the USB flash drive to the USB port of the instrument.
3. Select "Load File" to load the license file from the USB stick.
4. Select the license file to install in the instrument.
The R&S
NGU install the license option accordingly.
If the installation is successful, the option is displayed in the "Active" window.
To manually enter the key code, proceed as follows:
1. Select "Add" key to invoke the license key on-screen keyboard.
Figure 6-75: License key on-screen keyboard
2. Enter the key code (30-digit number) of the option in the entry box.
3. Confirm entries with the enter key
.
General instrument settings
