![background image](http://html2.mh-extra.com/html/rands/ngl200-series/ngl200-series_user-manual_3088605109.webp)
Remote Control Commands
R&S
®
NGL200
106
User Manual 1178.8736.02 ─ 02.01
Parameters:
<channel>
1 | 2 | 3 | 4
Example:
See
Usage:
Setting only
FUSE[:STATe]
<state>
FUSE[:STATe]?
Sets/Queries the fuse function in the selected channel.
Parameters:
<state>
OFF | ON | 0 | 1
ON | 1
Fuse function is activated.
OFF | 0
Fuse function is not activated.
Example:
See
7.5.8
OVP Setting
The
VOLTage:PROTection
subsystem contains the commands for setting the over-
voltage protection parameters for the output channels. The default unit is V.
Configuration Commands