Remote Control
R&S
®
NGE100B
61
User Manual 5601.1343.02 ─ 02
Figure 6-1: Device manager
6.1.2
LAN
For direct connection to a host (PC) or indirect connection via a switch, a double shiel-
ded network cable (e.g. CAT.5, CAT.5e, CAT.5 +, CAT.6 or CAT.7) is required and
equipped with an Ethernet plug type (RJ-45 type connector) on both sides. As a net-
work cable, either an uncrossed or a cross-over cable can be used.
It is possible to perform a complete parameter setting via the manual assignment of a
fixed IP address or automatic assignment of a dynamic IP address allocation. Please
contact your IT administrator to make the correct settings.
For more information on the LAN settings, see
Chapter 5.6.1.1, "Wired Connection"
6.1.3
WLAN
Wi-Fi Transmitter Performance
Frequency range: 2412 MHz to 2484 MHz
Power: 19.5 dBm typical
Interfaces and Protocols
www.allice.de
Allice Messtechnik GmbH
