R&S LCX Series, User Manual

Page: 87 / 242

Instrument functions
R&S
®
LCX Series
87 User Manual 1179.2260.02 ─ 02
The graphical results display shows the traces of the measurement results for the
selected parameters. The softkeys enable you to select the parameters for display
according to your measurement.
How to: see Chapter 8.8.1.2, "Displaying the readings in the live chart" , on page 88
8.8.1.1 Live chart settings
In the live chart view, you can select the parameters for display and configure the
traces.
Access:
1. Press the [settings] key at the front panel.
2. In the "Functions" tab, select "Live Chart".
2
3
4
1
8
7
6
5
Figure 8-10: Live chart controls
1 = Time base
2 = Parameter pair softkeys
3 = Return softkey
4 = Reset softkey
5 = Min/Max readings of
Θ
r
6 = Phase angle
Θ
r
measurement trace
7 = Impedance Z measurement trace
8 = Min/Max readings of Z
The chart window shows the traces of the measured parameters, which you can
select and configure with the softkeys on the right.
How to: see Chapter 8.8.1.2, "Displaying the readings in the live chart" , on page 88
TB ..................................................................................................................................88
<measurement parameter> ...........................................................................................88
Back .............................................................................................................................. 88
Clear ..............................................................................................................................88
Specific instrument functions