Instrument functions
R&S
®
LCX Series
75
User Manual 1179.2260.02 ─ 02
8.6.1
Measurement parameter settings
The "Measurement" parameters define additional settings that relate, e.g., to the mea-
surement conditions.
Access:
1. Press the [settings] key at the front panel.
2. Select the "Measurement" tab.
Figure 8-2: Measurement settings dialog
The dialog enables you to configure, measurement conditions, e.g. cable length
from the connected test fixture, external bias of impedance measurement range.
The required remote commands are described in:
●
Chapter 11.5, "BIAS subsystem"
●
Chapter 11.6, "CORRection subsystem"
●
Chapter 11.10, "FUNCtion subsystem"
How to: see
Chapter 8.6, "Measurement parameters"
......................................................................................... 77
Measurement parameters
