R&S LCX Series User Manual Download

Page: 15 / 242

Documentation overview

R&S

LCX Series

User Manual 1179.2260.02 ─ 02

3.6

Printed safety instructions

Provides safety information in many languages. The printed document is delivered with
the product.

3.7

Data sheets and brochures

The data sheet contains the technical specifications of the R&S

LCX. It also lists the

firmware applications and their order numbers, and optional accessories.

The brochure provides an overview of the instrument and deals with the specific char-
acteristics.

See

www.rohde-schwarz.com/brochure-datasheet/lcx

3.8

Release notes and open-source acknowledgment
(OSA)

The release notes list new features, improvements and known issues of the current
firmware version, and describe the firmware installation.

The open-source acknowledgment document provides verbatim license texts of the
used open source software.

See

www.rohde-schwarz.com/firmware/lcx

3.9

Application notes, application cards, white papers,
etc.

These documents deal with special applications or background information on particu-
lar topics.

See

www.rohde-schwarz.com/application/lcx

3.10

Remote control driver

The instrument drivers enable remote control via the corresponding interfaces. The
drivers and installation instructions are available for download on the product page at

www.rohde-schwarz.com/driver/lcx

Remote control driver

Summary of Contents for LCX Series



















































































































































































































































Search results

Summary of Contents for LCX Series

Reviews:

Related manuals for LCX Series

Brands by name

Popular brands

R&S LCX Series, User Manual

Search results

Summary of Contents for LCX Series

Reviews:

Related manuals for LCX Series

Brands by name

Popular brands